Skip to main content
Why Does My AC Smell Musty?

Why Does My AC Smell Musty? Causes & How to Fix It

Indiana gets a fair amount of snow, but summers are when homeowners see the most precipitation. With summer rain and heat comes humidity, which means your AC might start to smell musty.

The experts at Dugan Air Heating & Cooling have some helpful tips and information if your AC smells musty, so you can enjoy a clean-smelling, healthy home before the summer hits. Discover some common causes of musty smells, how to eliminate musty AC unit odor, and more.

Common Causes of a Musty Smell in an AC

The musty smell from your AC unit may be caused by a variety of issues. Here are some of the most common causes of a musty odor.

Mold and mildew

An accumulation of moisture creates the perfect breeding ground for mold and mildew to grow and thrive. AC units remove moisture from the air, which can start to accumulate in your drain pan, air ducts, or evaporator coils.

If your air conditioner isn’t properly maintained or cleaned regularly, mold and mildew can start to grow, creating an unmistakable musty smell. Mold in your AC is a health hazard that requires prompt attention.

Dirty filters

dirty_filter

The air filter in yourHVAC system is designed to trap particles like dust, pollen, and pet dander. However, a clogged or dirty filter can cause moisture buildup, leading to musty smells. A clogged air filter also restricts airflow, which affects your air conditioner’s efficiency and increases your energy costs. Over time, dirty filters can lead to a stressful system breakdown.

Other common causes

Moisture and mold/mildew are the most common causes of a musty smell in an AC, but inadequate ventilation can also contribute to the unpleasant odor. Constant temperature fluctuations may lead to excess condensation and mold growth. If your blower wheel is dirty, grime will build up, creating a musty smell. A dead rodent or other pest stuck in your ductwork or HVAC system will cause a musty odor. 

Steps To Eliminate Musty Odors From Your AC

How do you get rid of an AC smell? Follow these steps to help eliminate unpleasant odors from your air conditioner and home: 

  • Step one: Clean or replace the air filter to increase airflow and prevent moisture and bacteria buildup.
  • Step two: Clean your evaporator coils by removing dirt and debris with a mixture of warm water, mild detergent, and a soft cloth or soft-bristled brush.
  • Step three: Inspect your drain pan and drain line for clogs, and empty the drain pan if it’s full of water.
  • Step four: Make sure your air vents are clear of obstructions and remove furniture or other objects blocking them to improve airflow.
  • Step five: Seal leaky ducts and repair cracked or broken ductwork to fight moisture buildup and musty odors.
  • Step six: Contact the pros at Dugan Air to schedule professional duct cleaning to remove dirt and persistent musty odors. 
  • Step seven: Use a mixture of vinegar and water to deodorize your AC unit and place an open container of baking soda nearby to absorb excess odors.
  • Step eight: Use a dehumidifier in your home if the humidity levels are too high and are contributing to a musty smell.
  • Step nine: Run your fan on low for a while to dry out your system after cleaning.

Health Risks Associated With Musty AC Smells

Preventing Musty Odors in Your AC

One of the best ways to avoid dealing with musty odors is to prevent them from occurring in the first place. Follow these tips to help prevent musty odors in your AC.

furnace filter maintenance

Practice regular maintenance

Routine maintenance — including changing your HVAC air filter every 30, 60, or 90 days — is a good way to prevent moisture buildup and musty odors. Have your system and air ducts inspected and cleaned every season to remove dirt and buildup. Clean your evaporator coil regularly to remove excess grime, and keep your condensate drain line clear and free from clogs. Doing this prevents water from pooling, which contributes to mold growth.

Address moisture issues

If you have a high humidity level in your home, use a dehumidifier to keep it to a minimum and prevent mold and mildew growth. Make sure your home has proper ventilation, especially in the kitchen and bathrooms, to keep moisture levels low. If your air ducts are leaking, have them sealed and repaired to stop moisture buildup and unpleasant musty odors. 

Use tools to remove odors

Several products help to keep the air inside your home fresh and clean, including air purifiers that use activated carbon filters to remove contaminants and odors. Place baking soda in a bowl near your AC unit to absorb moisture and odors. Clean your air vent slats regularly to remove debris and dust, which may contribute to musty smells.

Contact Dugan Air for a professional AC odor removal service, such as a special UV light installation that helps kill mold and mildew spores. 

When To Contact a Professional

Dugan technician performing maintenance

While the above tips are helpful for preventing and removing musty AC smells, there may come a time when it’s best to contact a professional. Consider calling Dugan Air for help with your musty AC odor issues when you notice the following:

  • The odor won’t go away: If the musty smell remains long after you’ve tried our troubleshooting tips, you might have a more serious underlying problem that requires professional help.
  • Visible signs of mold: If you can see mold growing in or around your AC unit or air vents, you have a mold problem that requires professional removal and remediation.
  • Low airflow: Weak or no airflow after changing the filter may indicate a more complex issue that requires help from a trained HVAC professional. 
  • Strange noises: Unusual sounds, such as rattling, hissing, or groaning, accompanied by a musty smell, may indicate a problem with the AC system components.
  • Health issues: If you or someone in your family experiences ongoing mold-related health issues, have the problem addressed as soon as possible to keep everyone healthy.

Contact Dugan Air for AC Services

The team at Dugan Air Heating & Cooling blends high standards of service with a friendly, community-centered approach. We aim to be the go-to choice for Indiana homeowners seeking both comfort and a personal connection. Contact us today if you need help addressing musty AC smells or want to schedule an HVAC service.

cracked heat exchanger symptoms

Symptoms of Cracked Heat Exchanger on Your Furnace

One of the most common furnace issues Indiana homeowners face is a cracked heat exchanger. Fortunately, your furnace will likely show signs to indicate you’re dealing with this problem so you can take action. The team at Dugan Air Heating and Cooling is highly skilled at performing all types of furnace repairs in Franklin, including addressing cracked heat exchangers and more.

dugan air_Symptoms of Cracked Heat Exchanger on Your Furnace

Common Symptoms of a Cracked Heat Exchanger

Here are some common signs and symptoms that may indicate a possible crack in your heat exchanger.

Unusual smells

A chemical or dusty smell or a burnt odor could mean you have a cracked furnace heat exchanger. If you’ve recently replaced your air filter and still notice these odors, your furnace needs immediate professional attention to address a possible carbon monoxide leak. In most cases, homeowners notice these odors as soon as they turn the furnace on. 

If you notice an unusual smell or a burning odor coming from your furnace, turn it off immediately and turn off the gas supply going to the furnace. Open your doors and windows to ventilate your home. Contact your local gas company to notify them of the odors, then call Dugan Air for a professional inspection and repair. 

Soot buildup around the furnace

Visible soot buildup around your furnace may mean the heat exchanger is cracked. Soot appears when the cracked component disrupts the combustion process and causes it to burn fuel incompletely. Combustion gases can escape before the heat is fully transferred, leading to soot formation. Look for a fine, black, powdery substance around your furnace if you suspect this is the issue. 

The furnace flame turns yellow instead of blue

The pilot light in your furnace should always have a steady, blue flame. A flickering or yellow (or orange) flame is one of the most common cracked heat exchanger symptoms. When the heat exchanger is cracked, air mixes with fuel and causes improper burning. Never ignore a yellow pilot flame — call Dugan Air right away.

Strange or loud furnace noises

Some furnace noises are normal, but new or unusually loud sounds may indicate an issue with your heat exchanger or another component. Common noises associated with a cracked heat exchanger in your furnace include popping, whistling, banging, or scraping sounds from the furnace cabinet. These noises may occur when the metal expands and contracts due to temperature changes or if the crack is large enough to cause a sudden change in pressure. 

Visible cracks on the heat exchanger

A visible crack is the most obvious sign of an issue with your heat exchanger. Examine the component closely for any cracks or splits. Visible cracks are commonly accompanied by strong chemical or gas-like odors, whistling sounds, or a flickering, yellow pilot light flame. Water leaking from your furnace may also be a sign of a cracked heat exchanger.

What To Do if You Suspect a Cracked Heat Exchanger

A cracked heat exchanger poses a serious safety risk due to the potential of a dangerous carbon monoxide (CO) leak. This odorless, colorless gas can cause a range of serious health issues and can even cause death. A cracked heat exchanger can also reduce the efficiency of your furnace, raise energy costs, and lead to uneven heating or a complete malfunction of the system. 

If you notice any of the above signs or suspect a cracked heat exchanger, follow these steps: 

  • Step one: If possible, turn off your furnace and the gas supply going to your home, then open the doors and windows to increase ventilation.
  • Step two: Leave your home and call your local gas company immediately if you suspect a gas leak.
  • Step three: Contact an experienced HVAC company for an emergency furnace inspection.
  • Step four: If the HVAC technician confirms you have a cracked heat exchanger, discuss whether you need a repair or replacement.
  • Step five: Install carbon monoxide detectors throughout your home to alert you of a possible gas leak. 
  • Step six: Enroll in a regular preventative maintenance plan to help your furnace operate safely and optimally for years to come. 

Contact Dugan Air for Premium Service

Knowing the signs of a cracked heat exchanger keeps you safe and preserves the functionality of your furnace. If left ignored, a cracked heat exchanger poses a threat to your furnace and your health.

The NATE-certified technicians at Dugan Air provide top-notch furnace inspections, repairs, and replacements with a touch of Irish charm. Contact us to schedule an appointment and experience the Dugan Difference today!

Frequently Asked Questions

What causes a heat exchanger to crack?

Overheating due to dirty air filters or ductwork, worn control valves, and prolonged wear and tear due to expansion and contraction are the most common causes of a cracked heat exchanger.

Can a cracked heat exchanger be repaired?

In some cases, a cracked heat exchanger can be repaired by welding the cracks. However, older furnaces may need to have the heat exchanger or the entire unit replaced if the damage is too extensive. 

How can I prevent a cracked heat exchanger?

The best way to prevent a cracked heat exchanger is to schedule regular furnace maintenance, including professional inspections and tune-ups. Visually check your furnace to look for damage, and keep air filters and ductwork clean and free of obstructions to encourage proper airflow and prevent overheating. 

Signs you need a new furnace

How Do You Know When Your Furnace Needs to Be Replaced?

It can be hard to know exactly when to replace a furnace. Due to the expense, you may want to stretch out your failing furnace’s life for one more year. However, if your furnace is no longer doing its job by heating your house properly, it may be time to consider an upgrade. 

At Dugan Air Heating & Cooling, our HVAC experts will help you decide when to call it quits with your current furnace without upselling you on extras or pushing the most expensive new model. Our goal is to create a comfortable home climate for you. 

Telltale Signs You Need a New Furnace

Signs you need a new furnace

Some of the top signs you need a new furnace include: 

Its age

While the typical furnace lifespan depends on the type, size, how much it’s used, and how often it’s serviced, a furnace loses efficiency and starts breaking down after 10 to 15 years. If your furnace is getting older, it might be time for an upgrade.

Frequent repairs

There comes a time when the cost and inconvenience of frequent repairs get to be too much. If you need to have your heating system serviced more than once a year and it’s getting too overwhelming or expensive, a new furnace might be the answer.

High electric bills

A failing furnace uses more electricity to heat your home, which shows up on your electric bills. If you see a big uptick in electrical costs when it’s cold outside, a new furnace will help.

Yellow or flickering furnace flame

A yellow or flickering pilot light indicates that the furnace isn’t mixing oxygen and gas correctly. This dangerous problem could mean excess gas is leaking into your home. At Dugan Air, we’ll install your new furnace safely and properly and do a full safety inspection so you don’t have to worry.

Some rooms are colder than others

An ailing furnace will struggle to heat your home evenly. If some rooms are always cold, even when the furnace is blasting, you may want to consider replacing the old model. We can help you find the right size furnace to suit your home’s unique needs. 

Poor indoor air quality

Depending on the problem, a furnace on its last legs will force dust and allergens into the air, or worse, it could release harmful toxins and gas. If you or your family members start noticing chest congestion, coughing, sneezing, dry nose and throat, headaches, or allergy symptoms, it’s a good idea to check your furnace and possibly replace it. 

Strange noises

One of the most common signs of a malfunctioning furnace is strange sounds, like banging, grinding, or knocking. This could indicate anything from mechanical issues to a clogged air filter. In some cases, it’s a simple fix, but unusual noises could also indicate impending disaster. Your local HVAC technician can guide you in your options. 

Constant short cycling

Short cycling, or turning on and off quickly, is a sure sign of a problem with your gas or electric furnace. There could be easy-to-fix issues like loose electrical connections or a dirty air filter, or it might indicate failing sensors and mechanical parts. Constant short cycling may mean your issue isn’t easily fixable. Schedule an inspection with Dugan Air to find out what your furnace’s short cycling means.

Factors to Consider When Replacing a Furnace

Now that you know how to tell if you need a new furnace, you may wonder how to choose a new one that’s right for your needs. When it comes to furnace replacement, here are the most important factors to consider.

The size

The size is one of the most important considerations when buying a new furnace. You need a furnace big enough to heat all the rooms in your home consistently without overworking but not so big that you’re wasting energy and causing short cycling when you run it.

Generally, a furnace should produce around 30 to 60 BTUs per square foot, but this is a guideline and not a hard and fast rule. Consider the home’s layout, insulation, and other factors when choosing a furnace size. If you’re not ready to do the math yourself, don’t worry — an expert at Dugan Air will help. 

Energy efficiency

The more energy-efficient your new furnace is, the less money you’ll have to spend per month on heating your home, which equals big savings in the long run.

Another benefit of a new and more energy-efficient model is that they often qualify for rebates and tax credits. You can feel confident knowing your system is designed with efficiency and innovation in mind. They also last longer than older models thanks to updated technology, and they need less maintenance overall because they’re better sealed and more user-friendly. 

Programmable thermostat

A programmable thermostat gives you the ultimate control over your home’s interior climate. You can set it to your desired temperature and program it to turn up or down when you’re away. Some smart thermostats remember your preferences to better enhance your home comfort. 

New furnaces may even offer voice controls, energy-tracking features, and geofencing technology that knows when you’re home and when you’re away, automatically adjusting the temperature to your preferences. If you want total control over your thermostat, you’ll love the new available furnace features.

The price

You’ll need to consider your budget when you purchase a major home appliance like a furnace. For many, price is a big factor. At Dugan Air, we understand that most families aren’t able to drop a large amount on a top-dollar model, which is why we offer financing options to help. This way, you can get the furnace you want in your home without sacrificing your savings. 

Extra features

Some top-of-the-line furnaces have additional features you can incorporate into your home, but they often cost extra. Are you looking for a basic model that turns on and off, or do you want your furnace to provide HEPA-quality air filtering capabilities or integrate into your smart home system? Our experts can help you decide.

Call Dugan Air For Your Furnace Needs

Ready to look at new furnaces? Need someone to check out that strange noise? Want to schedule your routine annual maintenance? We’re available now by phone or via our online contact form.

We’re passionate about helping our local community and work hard to ensure your home in Greenwood, Columbus, Franklin, and the surrounding area is warm and comfortable, even when temperatures fall below 32°F. Contact us today to experience the Dugan Difference! 

Frequently Asked Questions

How much does a new furnace cost?

The cost depends on the type, size, and features. The cost of a new furnace can range from $10,000 and up. 

How long does a furnace installation take?

The installation time depends on the complexity of the job. We’ll try to be in and out of your house in a day, but we’ll give you a more accurate time estimate after seeing your home and determining the amount of work involved. 

How often should a furnace be serviced?

We recommend servicing your furnace at least once a year before the winter chill blows in. 

What are the new HVAC Refrigerant regulations?

New regulations require the use of updated refrigerants that meet current industry standards, phasing out hydrofluorocarbons (HFCs) as part of the transition to modern refrigerant technology. 

New 2025 Refrigerant Changes

New 2025 Refrigerant Changes Indiana Homeowners Should Know

In 2025, refrigerant updates may impact homeowners with air conditioners. New regulations from the Environmental Protection Agency (EPA) will phase out older types of refrigerants (the cooling gas inside your air conditioner) due to their reported effects on the environment. This transition is known as the R410A phase-out.

If you have any questions about how this program will affect your air conditioner, you can call Dugan Air Heating & Cooling. We’re your local, trustworthy source for information about your HVAC system, and we can help you decide how to handle these changes, depending on the type of AC you have in your home and how old it is. 

Our experienced HVAC technicians are equipped to replace your older AC with a new, more efficient, and environmentally friendly model. We can also continue to repair and maintain your current air conditioner. Read on to learn more about what changes will occur, and how they will affect you in the near future. 

What is the New Refrigerant?

The new refrigerants in 2025 are known as A2L refrigerants. These are already used in small appliances and have been in use as HVAC refrigerants in other countries for years. 

Older refrigerants, such as R410A, are being phased out due to updates in environmental standards. These changes prioritize the use of newer refrigerants with improved efficiency and reduced environmental impact. While R410A has been a reliable option for many years, the industry is transitioning to alternatives that align with the latest regulations for refrigerant technology.  

What Will Replace R-410A in 2025?

The most commonly used A2Ls are R0454B and R-32. These are modern refrigerant options designed to meet updated efficiency and regulatory standards.

The A2L refrigerant classification indicates that these chemicals are designed to meet updated industry standards, offering low toxicity and mild flammability comparable to common household products. 

How to Prepare for the New 2025 Refrigerant Changes

If this is the first you’re hearing about the upcoming refrigerant changes, don’t panic. Your air conditioner will still be fine in January, and nothing is suddenly going to change. That said, you’ll want to seriously consider the future of your HVAC system moving forward. 

How to prepare for 2025 HVAC refrigerant changes

Some things you can do now include: 

Look into your local tax credits and local rebates for upgrading your HVAC system

There are federal tax credits available when you upgrade your home cooling system, and in Indiana, there are rebates for qualified homeowners too. Save some money on your system upgrade, while getting ahead of the issue by replacing your AC before repairs become too expensive.

Have your current system inspected now

If you’re not sure what kind of refrigerant your AC uses, you can schedule an inspection with Dugan Air. We’ll come to check out your air conditioner, and let you know whether these upcoming changes affect your home, and what options you have. 

Start thinking about replacing your air conditioner

Eventually, you’ll have to alter your system to accommodate these refrigerant changes. Now’s the time to start planning for this major household upgrade. You can also start looking into the possibility of retrofitting new parts into your existing system, especially if you’ve just replaced your AC and aren’t ready to buy a whole new system again. 

Call Dugan Air to schedule an appointment with an HVAC professional. One of our team members will take a look at your existing system and provide you with reasonable options, so you can make an informed decision when it’s time to make the change. 

How Will the R-410A Phase Out Affect You?

Don’t worry, it won’t be illegal to continue to recharge your air conditioner Freon products. For now, service parts and R-410A refrigerants will still be available. Eventually, you’ll need to change out your air conditioner or retrofit new parts onto your existing system. 

Air conditioner prices and HVAC system replacement costs will also go up about 30%, as manufacturers need to upgrade their factories and make big design changes to accommodate the refrigerant changes. There may also be supply chain issues as these changes take place, so your upgrades and repairs will take longer than usual. 

Because the new refrigerants are classified as being flammable, building codes and safety standards surrounding HVAC systems will also need to be upgraded, which can affect the costs if you’re planning a renovation or building a new home. 

When to Replace Existing HVAC Systems

Upgrading your HVAC system sooner rather than later can help you stay ahead of upcoming changes and avoid potential delays as demand increases. Factors like your budget and the condition of your current system will guide your decision, but planning ahead ensures you’re well-prepared. Addressing the upgrade now may also help you avoid higher repair and parts costs in the future, giving you peace of mind and greater control over your home comfort.

Benefits of Upgrading Your HVAC

While it may be annoying to have to make big changes to your home heating and cooling system, there are some big benefits to upgrading your HVAC including:

Efficiency

A new air conditioner will save you money in the long term, because it runs more efficiently, using less energy. 

Convenience

New AC models are programmable, they can integrate into smart home technology, and they even remember your preferences. You can set your air conditioner to keep you home exactly as you like it, 24 hours a day. 

Forward-thinking choice

Upgrading to a new A2L-using air conditioner means you’re embracing the latest advancements in refrigerant technology, ensuring a more efficient and responsible solution for your home. 

Better safety standards

Because A2Ls have a higher flammability rating than previous refrigerants, there are higher safety standards required in building codes and HVAC system designs, which ultimately benefit you and your family, keeping you safer. 

How Dugan Air Can Help With 2025 Refrigerant Changes

Not only does Dugan Air troubleshoot your AC issues and keep it running efficiently, but we’re also experts in air conditioning installations and replacements. We’ll help you find the right AC for your home at a reasonable cost, and our team will professionally install it for you at your earliest convenience. We offer easy financing options to assist you in getting this big job done now, so you don’t have to worry. Experience the Dugan Difference, with our expert HVAC team on your side. 

Call Dugan Air For All Your AC Needs

Ready to speak to a Dugan Air representative about the 2025 refrigerant changes? Call us today or schedule an appointment for a system inspection. We care about our local community and will do all we can to help get you ready for these big HVAC changes. 

Frequently Asked Questions About the 2025 Refrigerant Transition

What changes next year for air conditioners?

Homeowners with air conditioners that use R-410A refrigerant will eventually need to upgrade to newer models designed to comply with updated industry standards. 

What will replace 410A in 2025?

In 2025, new refrigerants like R-454B and R-32 will replace R-410A. 

What refrigerant is being phased out?

R-410A refrigerant is being phased out in 2025, along with others that do not meet updated industry standards for refrigerant technology.

Reasons why your furnace keeps freezing up

6 Reasons Your Furnace Keeps Freezing Up

Why Does My Furnace Keep Freezing Up?

There can be several reasons why your furnace keeps freezing up in the winter, including clogged air filters, blocked vents, frozen condensate lines, faulty thermostats, broken blower motors, and improper furnace sizing. Many of these issues restrict airflow, which can cause condensation to freeze inside your furnace. We’ll explore each cause of a frozen furnace, as well as troubleshooting measures, preventative tips, and how Dugan Air can help solve your frozen furnace problems.

Can a Furnace Really Freeze Up in Winter?

Wondering whether a furnace can freeze up in winter? The short answer — absolutely. When temperatures drop below 32°F, problems such as airflow and drainage issues can cause water to freeze before it has time to exit the furnace. This leads to blockages inside the furnace, preventing it from heating your home properly. 

If you’ve noticed your furnace freezing up, it doesn’t mean it’s broken. It could be a simple issue like a clogged air filter or a mechanical issue that an HVAC professional can fix. Our team at Dugan Air offers emergency HVAC support in the greater Indianapolis area, including Greenwood, Franklin, Mooresville, Columbus, and surrounding areas.

6 Common Causes of a Frozen Furnace

6 Causes of Furnace Freezing

Several issues can cause a frozen furnace, including airflow problems and a faulty thermostat reading. We’ll explore six of the most common causes of a frozen furnace so you can determine what’s getting in the way of a cozy home.

Clogged or dirty air filter restricting airflow

Airflow is essential for your furnace to properly heat your home. When furnace filters become clogged or dirty, it’s harder for air to flow freely, which can lead to condensation building up inside your furnace. In cold weather, this condensation freezes and causes internal furnace problems.

The best way to prevent this is to check your furnace filters once a month and change them every three months (or as recommended by the manufacturer). However, if freezing is already happening, it’s best to call a professional to resolve the problem. 

Closed vents or blocked returns

In some cases, the problem lies outside the furnace itself. When dirty, blocked, or damaged air vents impede proper airflow, condensation is forced to remain within the system, potentially leading to ice buildup. This can even mean that a furnace can start to freeze while it’s running.

Luckily, this is a simple fix. Open the vents and keep furniture and other items away from them. If your ducts are collapsed or damaged, you’ll likely need a professional to replace the damaged parts and get your home heating system back up and running.

Blocked or frozen condensate drain line

Your furnace naturally produces moisture when it runs, which exits the system through the condensate drain line. However, when the line becomes dirty or clogged, moisture can get stuck and freeze inside. This may also occur in lines and pipes that aren’t properly insulated for winter.

Faulty thermostat

If your HVAC thermostat incorrectly reads the temperature in your home, the furnace will have difficulty maintaining a temperature above freezing in its internal components. This can lead to ice formation wherever condensate forms. 

Furnace tip: If your only problem is a furnace freeze-up, it’s often due to one of these causes. However, if you’re experiencing other furnace problems, such as a faulty pilot light, unusual furnace noises, or an unreliable heat exchanger, there may be a bigger problem. One of our Dugan Air pros can inspect your furnace and provide an expert diagnosis and repair plan.

Blower motor not working properly

The blower motor and fan are also essential parts for proper airflow. Damage or wear on either part can reduce airflow, leading to the formation and freezing of condensation. Since these are internal components, it’s important to call an HVAC technician for professional furnace repair.

Improper furnace sizing 

A furnace that’s too small will run overtime trying to heat the space, which speeds up wear and tear and can lead to breakdowns. A furnace that’s too large will short-cycle, which can lead to various problems, including freezing. A qualified HVAC pro can help you determine the right size of furnace for your home.

In some cases, large amounts of ice buildup can cause damage to your furnace. If your furnace starts to freeze up, it’s important to call a pro and address the problem so it doesn’t lead to costly damage. Frozen furnace repair costs vary and will depend on the cause of the freeze-up.

What To Do If Your Furnace Freezes Up

If a frozen furnace has left you stuck in the cold, try these simple steps for what to do if your furnace freezes up:

Step 1: Remove the ice

Using warm water or warm air, remove the ice from the furnace. This may involve flushing the condensate drain line, which you can do yourself if you’re comfortable.

Step 2: Check the thermostat

Confirm that your thermostat is set to the correct temperature and that there are no heaters or other devices nearby that might throw off the reading. If the thermostat is incorrect or broken, it may even prevent the heater from turning on.

Step 3: Check the filters

Check that your furnace filters are clean and not clogged. In general, it’s best to check your filters once a month and change them every three months (or as recommended by the manufacturer).

Step 4: Check the condenser coil

Check that there’s nothing obstructing the condenser coils, such as old leaves, snow, or debris. 

Step 5: Examine for leaks

Examine the outside of your furnace and check for any signs of visible damage, leaking water, or condensation. As a general rule, don’t open the internal components — if you have to unscrew anything, it’s best left to the pros.

Step 6: Check vents and ducts

Perform a walkthrough of your home to ensure that there are no obstructions blocking the vents and ducts. This may include rugs, furniture, and other things that can prevent proper airflow.

If your furnace keeps freezing even after you try all of these DIY steps, call Dugan Air for emergency furnace repair. Most furnaces last 15 to 20 years, so if you have an older furnace that keeps freezing, it may also be time to consider furnace replacement.

Prevent Furnace Freeze-Ups Before Winter Hits

The greater Indianapolis area can often drop below freezing as early as mid-October. Prevention is key to keeping your furnace from freezing during these cold spells, so try these tips to keep your home cool and comfortable.

Schedule annual maintenance

The best way to prevent your furnace from freezing is to schedule regular maintenance with your trusted local HVAC professionals. It’s recommended to book furnace maintenance at least once a year, ideally in the fall before the heavy-use season begins. Aim to schedule your service earlier, if possible, so you can make sure to avoid the frost/freeze dates in Indiana. 

Stay on top of DIY maintenance

Regularly checking and changing the air filter is key to keeping air flowing easily through your furnace and preventing freeze-ups. It’s also important to gently wipe down the coils to remove dirt and improve airflow.

Consider insulating measures

You can also contact a pro to help you install preventative anti-freezing measures, such as a self-regulating heating cable system around the condensate line.

Call Dugan for Professional Furnace Services

From routine maintenance and anti-freezing prevention to emergency frozen furnace repair, Dugan Air Heating & Cooling is your go-to solution for furnace services in Indiana. Our professional HVAC technicians will assess your issue and give realistic, cost-effective, and long-lasting solutions with no upsells or unnecessary extras. Contact us today to book your next appointment and experience the Dugan difference.

Frequently Asked Questions

Is it normal for HVAC to freeze in the summer?

No. If your HVAC has ice on the inside or outside of the unit, there’s a problem. Schedule service with a professional who can find the cause of the problem and fix it. 

Does low refrigerant cause freeze-up?

Yes. Low refrigerant levels can cause freeze-up in your HVAC system because there’s less pressure inside the coils, making them too cold and causing moisture to freeze. Your HVAC system needs adequate refrigerant to absorb heat and work properly. 

How do you keep the furnace drain from freezing?

The simplest way to keep your furnace drain from freezing is to insulate the pipe with an insulated wrap or a weather-proof sleeve. Also, consider shortening the pipe so the water has a shorter distance to travel (and less time to freeze inside). This helps prevent a high-efficiency furnace condensate line from freezing.

Why is Cold Air Blowing Out of Vents When Heat is On

Why is Cold Air Blowing Out of Vents When the Heat is On?

There’s nothing quite as frustrating as cranking up the thermostat on a chilly evening in Indiana, only to feel cold air rushing through your vents. You’re expecting a cozy, warm home, but you’re left shivering instead. Why is cool air coming out of your vents when the heat is on? Broken components, buildup, or electrical failure can prevent your furnace from functioning correctly, causing temperatures to plummet. Discover the most common reasons cold air is blowing from your vents and the steps you can take to restore warmth to your home.

6 Likely Causes of Cold Air Blowing From the Heater

Below are six issues that could explain why your furnace is blowing cold air. 

Reasons why cold air is blowing out of vents when heat is on

1. The pilot light is damaged

If you have an older furnace, it likely has a gas pilot light that ignites to help warm your home. When the pilot light goes out or gets damaged, your burners can’t produce heat, and your system ends up blowing cool or cold air from your vents instead.

2. The air filter is dirty

When your filter gets clogged with dust, pet hair, and debris, it restricts airflow to your furnace. This causes your system to overheat, and as a safety precaution, it shuts down and stops producing warm air.

3. There’s not enough gas

Your furnace needs a steady supply of gas to ignite the burners and warm the air that flows through your vents. If your gas supply is low, your furnace can’t ignite the burners to warm the air distributed throughout your vents.

4. The condensate lines are clogged 

New, high-efficiency furnaces produce condensation during the heating process. This moisture needs to drain away through condensate lines. When these become clogged, it will prevent the pilot light from igniting, leaving only cool air coming through your vents. This could also be why your furnace is leaking water or freezing up. 

5. There’s a leak in your ductwork

Cracks or holes in your home’s ductwork allow heat to escape from the air before it reaches the vents. 

6. Your thermostat is on the wrong setting

Your thermostat should always be on the ‘auto’ setting rather than ‘on.’ If it’s on the wrong setting, your furnace will run continuously even when it’s not producing heat, causing cold air to blow from your vents.

Troubleshooting Steps When the Heat’s on, but Cold Air Is Coming Out of the Vents

Before calling the Dugan Air HVAC professionals, there are a few tasks you can do yourself if the heat is on but cold air is coming out:

  • Check the thermostat: Make sure it’s set to “heat” and “auto,” and the temperature setting is higher than your current room temperature.
  • Check your air filter: If the air filter is dirty or clogged, replace it with a new one. The best way to check is to hold up the filter to a light. If you can’t see light passing through, it’s time for a replacement.
  • Inspect the pilot light: If you have a gas furnace, check if the pilot light is lit. If it has blown out, carefully relight it following the manufacturer’s instructions.
  • Look at your circuit breaker: Make sure the breaker for your furnace hasn’t tripped. If it has, reset it and see if that solves the furnace problem.
  • Replace your thermostat batteries: If your thermostat isn’t responding, try changing the batteries and recheck the settings.
  • Inspect your heating system: Look for visible signs of damage or malfunction, such as dents, cracks, or error codes, that indicate an issue within the unit.
  • Inspect your vents: Make sure furniture, curtains, or other household items aren’t blocking your supply or return vents.

What not to do

When cold air is blowing from the heater, some tasks are best left to the professionals. Here’s what not to do: 

  • Don’t open furnace panels or access doors: You could expose yourself to dangerous components or void your warranty.
  • Don’t touch the gas valves: Gas-related repairs need to be handled by licensed technicians for your safety.
  • Don’t ignore strange sounds or smells: If you smell gas or hear unusual noises, turn off your system and call a professional immediately.

Heat Pump Blowing Cold Air? Here’s What To Know

If you have a heat pump system, cold air from your vents may not be a problem. Heat pumps work differently from furnaces, and there are a couple of reasons why cool air is completely normal. 

Defrost mode

When it’s cold outside, ice builds up on your heat pump’s outdoor unit. To handle this, your system automatically enters defrost mode, reversing the heating cycle to melt the ice. During this mode, which lasts about 15 minutes, cold air can blow into your rooms. 

Auxiliary heat

When it’s extremely cold outside, a heat pump can struggle to extract heat from the outside air. When this happens, auxiliary or “emergency heat” kicks in. There’s usually a brief delay before this backup heat engages, during which you might feel cooler air.

If you’re feeling consistent cold air from your heat pump, you may need heat pump repairs from Dugan Air. 

Prevent Cold Air Problems With Regular Furnace Maintenance

The best way to avoid cold air surprises from your heating system is with annual maintenance. A licensed technician will inspect, clean, and tune up your system to guarantee it functions properly. Along with regular tune-ups, there are some preventative measures you can take at home to keep your furnace working in top condition:

  • Replace the air filters every one to three months.
  • Schedule regular duct cleanings. 
  • Test your thermostat to ensure it is working correctly, and replace the batteries regularly.
  • Clear the area surrounding your furnace to prevent blockages, fire hazards, or restricted airflow.
  • Check that the pilot light is on and burning with a blue flame. 
  • Take action at the first sign of furnace malfunction. Contacting a professional as soon as you notice an issue will prevent it from worsening and affecting other components.

Join our Premium Clover Club for scheduled heating and cooling maintenance, VIP discounts, and other exclusive benefits.

When To Call a Professional Heating Technician in Johnson County

There are a few instances when your heating system needs to be looked at by the professionals at Dugan Air:

  • Your furnace won’t turn on at all.
  • You’ve replaced the filter and checked the thermostat, but cold air is still blowing.
  • You smell gas in your home.
  • Your furnace may have a cracked heat exchanger. 
  • The pilot light won’t stay lit. 
  • You hear banging, screeching, or rumbling sounds from your furnace.
  • Your carbon monoxide detector goes off.
  • The furnace is cycling on and off more frequently than usual.

Our team at Dugan Air has seen it all, and we’re equipped to diagnose and fix problems quickly and safely. We offer 24/7 heating emergency support for residents in Greenwood, Mooresville, Franklin, Columbus, and surrounding areas.

Fix Your Cold Air Problem With Dugan Air

When DIY troubleshooting doesn’t fix your furnace blowing cold air, Dugan Air is here to help with top-quality heating and cooling services. We combine premium service with a fun, no-shenanigans approach. Contact us today to schedule a heating consultation and fix your cold air problem. 

Frequently Asked Questions 

Does low refrigerant make my heat pump blow cold air?

Yes. When the refrigerant is low, the system can’t absorb and move enough heat. If you think you have low refrigerant, get a Dugan Air tech to inspect your heat pump for a leak.

When should I replace my furnace instead of repairing it?

If your furnace is approaching its 15-year lifespan and facing frequent, costly repairs, consider replacing it. Follow the 50% rule: if repairs are 50% the cost of a new furnace, it’s probably more cost-effective to buy a new one.

Can a bad thermostat cause cold air to blow from vents?

Absolutely. A malfunctioning thermostat can affect the temperature reading, leading the unit to think the house is warmer than it actually is. A bad thermostat can also keep your furnace fan running when it shouldn’t.

A family in warm clothes and blankets sits on a couch, looking cold. Text asks, "Why does my furnace pilot light keep going out?"—perfect for furnace troubleshooting. Dugan Air Heating & Cooling logo above.

Why Does My Furnace Pilot Light Keep Going Out?

Gas furnaces have a small flame called a pilot light that can sometimes go out. Sometimes, it can be re-lit, but if your furnace pilot light keeps going out repeatedly, it could indicate a bigger issue or even a safety hazard. 

Read on to discover why your pilot light might be going out, what you should do if it happens, and when to call the experts at Dugan Air for assistance.

What Does a Furnace Pilot Light Do?

The pilot light in your furnace is a small flame that provides a consistent ignition source. When the thermostat signals the furnace to turn on, the gas valve releases gas and the pilot light ignites it, starting the heating process. 

Common Reasons Why Your Furnace Pilot Light Keeps Going Out

Here are some of the most common reasons your pilot light is going out.

Reasons why furnace pilot light keeps going out

You’ve run out of gas

The light needs a consistent supply of gas to stay lit, so a lack of flame may indicate that you’re low on fuel or there’s an issue with the gas supply preventing the gas from reaching the pilot light. 

There’s an electrical issue 

Sometimes, wiring can come loose in your furnace. If this happens, the pilot light won’t light when it needs to. An expert HVAC technician can diagnose this problem. 

You have a faulty thermocouple

If your thermocouple is damaged or not working properly, it will prevent the gas from reaching your pilot light. A faulty thermocouple can be fixed or replaced by a professional.

It’s dirty

Sometimes, the issue is as simple as soot or carbon blocking the fuel line in the pilot light. A quick cleaning might get your pilot back in good working order, but if it keeps going out, call for help.

The fuel line is damaged

If the fuel line is blocked or damaged, gas can’t flow freely, preventing the pilot light from staying lit. The line may need to be professionally cleaned or changed. A damaged gas line can be a serious safety hazard, so if you suspect a gas leak, follow emergency procedures and then call an expert for help.

What To Do When Your Pilot Light Is Out

When your furnace pilot light is out, you should first turn the pilot light reset switch to the OFF position. Wait at least five minutes for the gas to dissipate from the chamber, then turn the knob to PILOT, hold the reset button down, and light the flame. The light should fire up right away and stay steady.

Once the pilot light is relit, turn the gas control back to ON. If it goes out again, it’s time to call for professional furnace servicing.

When To Call a Professional for Pilot Light Issues

When your pilot light keeps going out, your furnace can’t work properly. It may also indicate a serious issue with your gas supply. Call a professional if you smell gas or a rotten egg odor or if the pilot light is split, flickering, weak, or burning yellow or orange instead of blue. 

Preventive Tips to Keep Your Pilot Light Lit

The best way to ensure your pilot light stays lit and your furnace works well year-round is to keep up with preventative maintenance. Scheduling regular service with our HVAC team helps keep your fuel lines clean and allows us to check out all the important parts of your furnace to ensure your pilot light stays lit. You can relax knowing your furnace is ready for another chilly winter and maybe even save some money on your next energy bill. 

Some DIY solutions include ensuring there are no drafty doors or windows near your furnace. If you have a gas furnace, check if you have enough fuel in the tank. If you’re unsure what the issue is, call Dugan Air for assistance.

Call Dugan Air for HVAC Service 

If your furnace pilot light won’t stay lit, contact the team at Dugan. We offer furnace maintenance, repairs, and replacement services throughout the Johnson County area, including Morgantown, Martinsville, Columbus, and Bargersville. Our team cares about our community, and we’ll do everything we can to make sure you and your family stay safe and comfortable in your home year-round. 

Don’t let your old furnace pilot light or a strange furnace noise stress you out. Call us and we’ll fix the problem fast. When it comes to HVAC systems, we offer premium, customer-focused care. If you want to experience the Dugan difference, schedule your service call today and find out why our service stands out from the rest. We’re the HVAC provider that Indiana homeowners trust.

Frequently Asked Questions

How do I know if my thermocouple is bad on my furnace?

If your pilot light ignites but then goes out after you let go of the gas control knob, or if you notice your pilot light keeps going out for no discernible reason, it’s likely a thermocouple issue. It could be dirty or defective. 

Is it easy to replace a thermocouple?

Replacing a thermocouple can take a few hours and involves disconnecting gas lines. This type of job has safety risks, so we recommend calling a professional to replace your furnace thermocouple.

What’s Included in a Premium Furnace Tune-Up From Dugan Air?

As homeowners, ensuring the safety and efficiency of our homes is critical. One integral aspect often overlooked is the regular maintenance of our HVAC systems, especially the furnace.

Beyond just optimizing performance, a Premium Furnace Tune-Up from Dugan Air is a yearly service that can significantly impact the safety of your home. Wondering what’s included in this essential service? Our experts are here to explain:

1. Electrical Safety Check

Dugan Air technician performing an electric check on a furnace

Our experienced technicians conduct a meticulous inspection of all electrical components in your furnace. Identifying and rectifying any issues promptly ensures smooth operation and eliminates potential fire hazards associated with faulty wiring or connections.

2. Refrigerant Check

A Dugan Air HVAC technician walking to replace an HVAC system

A key component of our Premium Tune-Up involves a comprehensive check of your furnace’s refrigerant levels. Proper refrigerant levels are essential for efficient heating and prevent the risk of system malfunctions, ensuring your home stays warm and safe.

[cta_shortcode]

3. Inspection of Critical Components

Dugan technician performing HVAC maintenance outside a home

Every part of your furnace plays a crucial role in its overall functionality. From the heat exchanger to the blower motor, our technicians thoroughly inspect and test each component. Identifying and addressing any wear or damage is vital for preventing breakdowns that could compromise your safety.

4. Drain Check

Dugan Air technician checking drains for clogs

A clogged drain can lead to water damage and mold growth. Our Premium Tune-Up includes a drain check to make sure the condensate drains properly, protecting your home from potential water-related issues.

5. Full Safety Check

Dugan Air technician screwing a vent covering into the wall

Dugan Air Heating & Cooling’s commitment to safety extends beyond just the furnace. We conduct a comprehensive safety check, ensuring every aspect of your heating system complies with industry standards. This meticulous examination gives you peace of mind to know your home is protected.

Premium Furnace Service From Dugan Air

What sets our Premium Furnace Tune-Up apart is the dedication of our service team. Beyond the checklist, our technicians bring a wealth of experience and a commitment to excellence. Their keen eye for detail and proactive approach guarantee that no potential safety concern goes unnoticed.

[cta_shortcode]

By investing in a Premium Furnace Tune-Up with Dugan Air, homeowners optimize the performance of their heating systems and prioritize the safety of their homes.

Electrical safety, efficient operation, and thorough inspections are the pillars of our service, ensuring your winter stays warm, cozy, and, above all, safe.

Schedule your Premium Furnace Tune-Up today and experience the Dugan Air Difference in home safety and comfort.

Navigating Home Comfort: Should You Repair or Replace Your System?

The decision to repair or replace your home comfort systems is a big one, impacting your immediate comfort and long-term energy costs. Understanding the signs and factors influencing this choice can save you from chilly surprises and financial burdens.

Our team breaks down the pros and cons of both options to help you make the right decision for your family and home.

Signs of a Struggling Home Comfort System

1. Is Age More Than a Number for Your HVAC?

The number 20 indicating the age of an HVAC system

The age of your system is a major factor. Typically, home comfort systems last 10 to 20 years. If yours is approaching this range and showing signs of fatigue, replacement might be more cost-effective in the long run.

2. Utility Bills on the Rise

A phone and tablet displaying expensive energy bills

A sudden spike in utility bills can be a red flag. While seasonal fluctuations are normal, consistent increases might indicate an inefficient system. Modern systems boast higher energy efficiency, making a replacement an investment that pays off over time.

3. Comfort Level of Your Home

A person comfortably sleeping in a chair next to a window

Inconsistent temperatures or frequent breakdowns are frustrating signs of an ailing system. If your home feels more like a game of temperature roulette, investing in a new system can restore equilibrium.

4. Loud, Unexpected Noises Coming From Your System

A person covering their ears from the loud noise of their HVAC system

Unusual sounds from your system, like clanks or whirrs, can signal impending problems. While repairs might address specific issues, persistent noise could indicate a worn-out system needing retirement.

A Balancing Act: Factors To Consider Before Repairing Your Comfort System

Efficiency of Your HVAC Matters

Close-up view of a smart thermostat on a white wall, showing 74 degrees

Newer systems come with advanced technology, offering higher energy efficiency. A more efficient system reduces your carbon footprint and trims down hefty energy bills every month.

Frequent Repairs Add Up

A pile of $10 bills that are spent on HVAC repairs

The financial strain of frequent repairs can sometimes outweigh the cost of a new HVAC system, making replacement a wise choice. While repairs can offer a temporary solution, a pattern of consistent breakdowns may mean your system has reached the end of its reliable life span.

In such cases, investing in a new system provides more efficient and reliable performance and eliminates the ongoing expenses associated with continuous repairs.

Increasing Your Home’s Value

A "For Sale" sign in front of a large white home.

Investing in a new home comfort system can enhance your property’s value. It’s not just about personal comfort; it’s an investment in the resale value and attractiveness of your home. Buyers will be much more likely to offer a higher price if they know the home comfort system was recently replaced.

Technological Benefits of New Systems

Someone controlling their smart thermostat from their phone

Modern systems come with smart technology, offering remote control and energy management. If you find yourself eyeing these tech-savvy features, it might be the perfect reason for an upgrade.

Seek Professional Guidance for a Second Opinion

Making the final decision between repair and replacement can be daunting. Seeking advice from HVAC professionals, like our seasoned experts at Dugan Air Heating & Cooling, ensures you’ll make an informed choice. Our team evaluates your system’s condition, considers your specific needs, and guides you toward the most cost-effective and efficient solution.

In the end, the choice between repair and replacement is a balancing act. Understanding the signs and considering the factors will empower you to make a decision that ensures a comfortable home and optimal energy efficiency.

Contact our team today to learn more and schedule expert HVAC system repairs or replacements.

Gifts That Keep on Giving: Why a New HVAC System Is the Perfect Present

The holiday season is upon us, and you’re in search of the perfect gift that will bring comfort, joy, and lasting value to your home and family.

While a new gadget or a shiny toy might capture attention for a while, there’s one gift that keeps on giving and truly enhances your quality of life: a new HVAC system. Here, we’ll explore why investing in a new HVAC system is an excellent idea that offers benefits well beyond the holiday season.

    Man happily relaxing on the couch

Comfort All Year

A new HVAC system is the gift of year-round comfort. Whether it’s sweltering heat in the summer or freezing temperatures in the winter, your home’s comfort is essential.

A modern, high-efficiency HVAC system will maintain a consistent and comfortable temperature throughout the seasons, ensuring everyone in your household stays cozy and content.

A stack of bills wrapped in a red bow next to a Christmas tree

Energy Efficiency & Cost Savings

One of the significant advantages of a new HVAC system is its energy efficiency. Modern systems are designed to be eco-friendly and energy-efficient, resulting in lower utility bills. The cost savings over the years mean your gift keeps giving back by reducing your energy expenses.

Plus, some areas offer rebates and tax incentives for upgrading to energy-efficient HVAC systems, making it a gift that keeps on giving in multiple ways.

A smart thermostat with Air Quality Good shown on it

Improved Air Quality

An often-overlooked benefit of a new HVAC system is the improvement of indoor air quality. These systems come with advanced filters and air purification technology, removing allergens, dust, and pollutants from the air.

Your family’s health and well-being are priceless gifts, and clean, fresh air can make a significant difference.

Winter-themed graphic of homes that have been sold

Increased Home Value

While you may not be thinking of selling your home right now, a new HVAC system adds to your property’s value. If you ever decide to put your house on the market, a modern, efficient heating and cooling system will be an attractive feature for potential buyers.

It’s an investment that can pay off if you decide to move in the future.

Family reading a book together during the holidays

Peace of Mind

Old HVAC systems can be unpredictable. They might break down at the worst possible moment, leading to costly emergency repairs. By investing in a new system, you’re ensuring peace of mind.

Most new systems come with warranties and maintenance packages, meaning you won’t have to worry about unexpected expenses during the holidays or any other time of the year.

When you want more home comfort, consider the gift to yourself that keeps on giving all year. Our team at Dugan Air are the experts in home comfort. We understand the importance of reliable heating and cooling systems, and we’re dedicated to making your home a haven of comfort, no matter the season.

Contact us today to learn more and schedule HVAC services or installations for your home.

Schedule Now

"*" indicates required fields

This field is for validation purposes and should be left unchanged.